Rub gently to remove air, pierce bubbles where necessary. Allow to stand from 2 to 48 hours, again this will be determined by the paint/coating type and thickness/number of layers.
Is Peelaway 1 Safe?
Peel Away 1 can remove up to 30 layers in one application. Suitable for removal of oil and lead based paints it provides safe lead containment and is a recommended system by the EPA.
Is Peelaway any good?
5.0 out of 5 stars Excellent paint stripper – worth the money! Stripped about 20 odd layers of paint off 2 cast iron fireplaces with this. I think I slopped this on quite thick, so I needed about 1 and 1/4 tubs in total, but I am sure I could have done it with just one 5kg tub if I had been more economical with it!
Can you leave Peelaway on too long?
Leaving on too long could damage the substrate or you may find the Peelaway® blanket and paste becomes too hard and difficult to clean up. Once a small test patch has confirmed that the Peelaway® product selected has worked we strongly recommend that larger areas are tested before starting your stripping project.
How much Peelaway 1 do I need?
per gallon; results may vary based on substrate texture and porosity. Spray Application: Dumond® Chemicals recommends that Peel Away® 1 be sprayed with a texture sprayer. Pump size should be at least ¾ gallon per min. Aluminum guns should NOT be used, as a chemical reaction will take place with Peel Away® 1.
Can I use Peelaway on glass?
Preparation: Cover and protect areas where
Plants and other foliage should be covered during application. For interior use, use polyethylene and masking tape to cover and protect adjacent sur- faces, including flooring. Note: Peel Away®1 will not affect glass or plastic surfaces, but will etch aluminum.
Is Peelaway caustic?
Product is a caustic water based paste which does not sustain combustion.
Is Peelaway toxic?
INGESTION May cause burns in mucous membranes, throat, oesophagus and stomach. SKIN CONTACT May cause serious chemical burns of the skin. EYE CONTACT Causes burns. ECOTOXICITY Not regarded as dangerous for the environment.
What is peel off paint?
Peel Off Paints are paints that can be removed whenever you want to change the color or finish of your car. When you want a new color, simply strip it away, and apply your new color or texture, even Chrome!
How long does Peelaway take to work?
Product can dwell 12-48 hours if necessary. Peel Away® 1 provides an average spread rate of approximately 20 Sq. Ft. per gallon; results may vary based on substrate texture and porosity and remover thickness.
What is a good paint remover from wood?
Top 5 Best Paint Strippers For Wood
Citristrip Paint And Varnish Stripping Gel.MAX Strip Paint And Varnish Stripper.Smart Strip Advanced Paint Remover.Peel Away 1 Heavy-Duty Paint Remover.Sunnyside Back to Nature Multi-Strip.
How do you remove dried on Peel?
The residue should not be difficult to remove by brushing gently with a soft bristled brush and water – toothbrush style brushes can work well for small crevices.
How long should I leave Peelaway on?
Rub gently to remove air, pierce bubbles where necessary. Allow to stand from 2 to 48 hours, again this will be determined by the paint/coating type and thickness/number of layers.
How do you use Peelaway 1 on wood?
Remove in small sections and scrape off loose debris and residue. Place in thick plastic tie up bags. Thoroughly wash the surface with plain water, nylon brush and sponge. Neutralise the surface using Peel Away Neutraliser for Peel Away 1 ONLY.
