If you don’t own a mat cutter, you can cut your mat window with an x-acto knife, but you won’t achieve a good clean bevel. Typically, if you cut 2-3 of your own mats, your tools will pay for themselves!
Can you cut a picture mat with an Exacto knife?
You can cut a matte board using an Exacto knife. If you want more professional cutting, you can use a bevel mat cutter, logan mat board cutter, mat board cutter spotlight, etc.
Can Cricut maker cut mat board?
The Cricut Maker and the Knife Blade are qualified to cut both 2-ply and 4-ply matboard. Matboard goes all the way up to 8-ply, but that’s too thick to cut, so stick to 2-ply and 4-ply matboard that is less than 2mm thick.
Is it cheaper to cut your own mats?
Pre Cut Mats with Volume Pricing Cost Almost the Same as DIY
Many artists believe that they can save money by cutting their own mats. If the time and cost of equipment is excluded, this is still likely not true. Wholesale mattes are typically purchased in 32×40″ sheets and then cut to size.
What is a matboard?
Matboard, also referred to as a mat, is a heavy paper-based material used in the picture framing process. This cardboard-like material sits between a frame and your photography or artwork to give it a complete finished look.
How do you cut matted picture frames?
Step One: Place the mat board on top of the back of your frame backing and trace around it with a pencil. After tracing, cut out the section of mat board using your X-Acto knife or other sharp blade. Step Two: Place your artwork in the center of the mat to measure the location of the opening.
What does double matted mean?
(3) Double and Triple Mats
A double mat consists of two (2) mat boards stacked together, a top mat and a bottom mat. The window opening of the bottom mat surrounds the image. The top mat has a larger window, which allows a small border of the bottom mat, called the reveal, to be shown.
How do you measure and cut a mat?
Use the ruler to measure the height and width of the picture you’ll be cutting the mat to fit. Both of the mats you cut should match the dimension of the picture exactly; the inner area of the second (window frame) mat will need to be cut at least a half inch smaller than the picture itself to hold it in place.
Can I use an exacto knife on Cricut mat?
Cheaper than anywhere else I’ve seen it and works well when weeding and cutting. I’ve cut materials using my xacto knife on this mat and it doesn’t damage the mat. I like the size of this mat because I can store it with my cutting mats.
Why does my Cricut keep cutting the top of the mat?
When your Cricut cuts the mat, it means there is an error in the settings or that you’re using the wrong blade for your material. If the pressure is too high for a material, the blade will push through. An easy way to avoid this problem is to do a small test cut before cutting out your whole design.
