Plug in timer to program; unplug to erase settings. After current time is set, P will flash to set time for block heater to start each day (3 hours before commute is ideal). Push the HOUR button to advance and PROGRAM to set. Flashing E prompts to set time for block heater to shut off at your daily departure time.
What does F mean on a Woods timer?
O is for on , F for off , numbers 1 thru 9 is number of hours unit is on after dark .
How do I program my woods outdoor timer?
Step 1: Access the On/Off Setting. Press the PROG button once. Step 2: Set the Desired Time. Press the minute and hour buttons as necessary, to the desired time. Step 3: Change the Day Setting. If needed, press the DAY button to choose the day or group of days that you want. Step 4: Repeat. Step 5: Exit This Mode.
How do you set a woods timer 50008?
Please the Reset by taking an object such as a toothpick or an extended paper clip; place it in the hole next to the “R”, not the “RST”. Hold the toothpick/paper clip down for 5 seconds; Release. Once this is done the timer will function properly after recharging the battery.
What does D mean on outdoor timer?
A: Random countdown. Timer turns ON at dusk and turns OFF after random countdown. Number of hours is randomly selected by timer. d: ON at dusk and off at dawn.
What does C mean on an outdoor timer?
A: Setting the Clock “C” – After plugging in, push HOUR button to advance through the 24-hr day to the closest half-hour, press PROGRAM to set the clock Setting the Program – After clock is set press the HOUR button to the time you want the timer to activate, push PROGRAM button to set auto-on-time Set the End Time –
What does F mean on an outdoor light timer?
F: timer is off.
Why does my dusk to dawn light stay on all day?
Potential issues could include a fixture or lamp shade that blocks the light, usage in-doors in a room without direct sunlight, or the light sensor could be faced toward a wall or inside a fixture without access to sunlight.
Why are my outside lights not working?
Outdoor lights will not work when the light bulb is burnt out, or the light fixture is damaged. The other culprits include a tripped circuit breaker in your electrical panel and a failed power source due to tripped GFCI (Ground Fault Circuit Interrupter).
