Align the cam connector with its side opening (or arrow) pointing to the small drilled hole. Turn right (clockwise) to tighten. Insert the cam lock bolt into the pre-drilled hole above the cam connector. Two parts should fit snugly against each other.
What does cam mean on a lock?
Cam locks are a type of hardware used for locking drawers, cabinets and other furnishings. These locks consist of a base, which contains a keyhole, and a long tailpiece or tongue known as a cam. When a key is inserted into the base, the cam is rotated between 180 and 90 degrees.
What are cam lock nuts?
Cam locks nut are popular connecting elements commonly used in the furniture industry. The primary purpose of their use is to create stable joints between two pieces of furniture. Cam locks nuts are placed in one part, e.g. wooden board or laminated board, together with the screw.
What is a cam screw?
Cam or locking screws are 2-part screws where the cam is fitted in one piece and the screw in a piece to be joined to this piece. By slotting the two pieces together and tightening the screw you have a reasonably secure join. If these parts are missing in the kit, they can be ordered on any construction site.
What size are IKEA cam screws?
Product Information: Cam-Lock Screws (IKEA Part #118331) Dimensions: 0.44 cm (L) x 0.07 cm (W) x 0.0 cm (D)
Are cam locks interchangeable?
Are Camlocks Interchangable? Between manufacturers, cam & groove couplings are interchangeable as they are built to the same standards. (The standard for cam & groove couplings is based on the US military specification Mil-C-27487 now superseded by A-A-59326D.
How do you break into a cam lock?
How to Unlock a Cam Lock in Furniture Assembly
Select a screwdriver that best fits the slotted or Phillips-head recess on the top of the cam. Turn the handle of the screwdriver counterclockwise to turn the cam within its hole. Pull one piece of furniture away from the other to confirm that you unlocked the cam lock.
Why won’t my cam locks lock?
If the pin is screwed in too far into the wood, it will be too short and the cam-lock will not be able to grab it to tighten the assembly. If you have screwed the pin in too far, unscrew the pin so that it is screwed only until the end of the thread – and try to assemble the unit again.
What are the IKEA screws called?
By Rain Noe – October 3, 2014. If you’ve ever assembled a piece of IKEA furniture, you’ve undoubtedly seen the two items up above, and you understand how they fit together: For the average consumer that doesn’t know what they’re called, they’re named cam lock nuts and cam screws.
What is a cam lock connector?
A CamLock connector, is an electrical single-pole connector often used in temporary electrical power distribution. Originally a trade-name, “Cam-Lok”, it has now evolved into a generic term for these types of connectors. They have dominated the North American market for a long time, and tend not to be used in Europe.
How do you unlock a cam lock without a key?
For a simple cam lock, you can get an old standard blade screwdriver that you don’t care about messing up. Use a hammer and drive the screwdriver into the key slot, the further the better. Use a pipe wrench on the screwdriver handle, and turn. In most cases, that will torque the lock open.
How do you get the screws out of Ikea furniture?
First make sure that it is not in a locked position (ie remove or lift the bolt attached to the side if any). Then simply screw a screw into the X-area of the fastener from outside, just 1-2 mm so that the screw kind of locks on to the fastener. Then you can wiggle it out.
Can you take IKEA furniture apart?
Yes, IKEA furniture is designed to be assembled and disassembled for easy moving and storage. Items that can be disassembled include wardrobes, bed frames, desks, bookcases, with disassembly instructions added to IKEA’s website regularly.
