The Enviro-Log is great for cooking, heating, camping and alot of occasions. It is made from 100% recycled wax cardboard. It says it burns up to 3 hours but mine burned almost 4 hours. We put two logs in and have waited half an hour and the temperature is barely above 225 degrees.
How long do Enviro-Logs last?
Enviro-Log keeps the fire going for about three hours, even if the material is green or damp. (For the last hour, the fire is much smaller.)
Do Enviro-Logs smell?
They do not smoke or smell, and they do not contain petroleum additives like other manufactured firelogs. You can also burn two logs together for a bigger fire and they are safe to cook over.
Do Enviro-Logs create creosote?
Enviro-Log firelogs produce 87 percent less creosote in a fireplace than oak cordwood (grams per typical fire basis). Enviro-Log firelogs have more than 50 percent energy content per pound and lower moisture content than typical cordwood (oak or fir).
What kind of wood is enviro-log?
Enviro-Log Firelogs are made from 100 percent recycled waxed cardboard and when compared to firewood, Enviro-Log Firelogs burn cleaner. Enviro-Log Firelogs emit: 30 percent less greenhouse gases.
Are Enviro-Logs toxic?
Enviro-Log Fire Logs are tested safe for use in woodstoves, fireplaces, chimineas, campfires, outdoor tailgating, cookout events and can be used to supplement a wood fire.
Can you roast marshmallows over Enviro logs?
“Enviro-Log Firelogs provide a long-lasting and clean-burning alternative to firewood. They are also safe to cook over – Perfect for roasting marshmallows or making s’mores.”
Can I use Enviro log in Solo stove?
can you use duraflame logs in the solostove? Yes, Duraflame logs can be used in this fire pit if they fit inside.
How do you extinguish Envirolog?
Extinguish your fire before you leave the campsite. Allow the charcoal, firelog or firewood to burn completely to ash, if possible. Stir the campfire ashes and embers with a shovel to ensure nothing is still burning. Pour water on the fire and be sure to saturate ALL embers.
Are duraflame logs bad for your chimney?
This is a myth. Artificial firelogs are not bad for your fireplace; in fact, they’re cleaner, safer, easier, and cheaper than regular wood.
Are eco logs good for the environment?
Whatever type of fuel you choose to use, Logs Direct are here to help. 100% natural materials, Blazers Eco logs are environmentally friendly, with no spitting or sparks. Easy to light and clean to burn.
Can you use duraflame with real wood?
The answer is yes, you can add wood to a duraflame log. However, adding wood to a duraflame log will not make it burn for longer. In fact, adding wood to a duraflame log may actually make it burn faster, because the added wood will create more heat.
How often does chimney need to be cleaned?
Most homeowners opt to have a Chimney Cleaning done every year as well, especially if they use their fireplace on a regular basis. Other venting systems connected to furnaces and stoves should also be cleaned on a regular basis to maintain safer operation.
Are Duraflame logs better than wood?
Firelogs burn much cleaner than real firewood. They typically produce 70 percent less particulate matter, 85 percent less carbon monoxide and 50 percent less smoke.
Can I burn 2 Duraflame logs at once?
However, if your fireplace does not have a grate and you want to burn the logs for longer than one hour then it is recommended that only two Duraflame Logs be burned at once. This will help keep heat from escaping up through the chimney instead of warming your living space.
Are Duraflame logs good?
Duraflame logs are a great option for people who want the convenience of a firelog without having to deal with the mess that traditional firewood can create. They also produce less smoke than traditional firewood, making them a good choice for people who have asthma or other respiratory problems.
How do I use eco logs?
Place 2 Eco Logs between 10-15cm apart from each other on a clean and stable surface. Place a firelighter in the middle of the logs. Light your firelighter. Place 3 Eco Logs on top of the first layer with enough space between each log to allow for the flame to burn through.
