How to Attach a Dremel Flex Shaft
Unscrew the nose cap from the end of the Dremel by twisting it to the left. Press and hold the collet lock button. Keep the collet lock button depressed and twist the collet nut to the left to remove it. Insert the drive nut in place of the collet. Tighten the nut using your fingers.

How do you change a sanding drum on a Dremel?

To change the sanding band on a Dremel you first have to turn off the power, then loosen the screw on top of the mandrel, remove the old sanding band, put on a new sanding band, tighten the screw on top of the mandrel and then turn on the power. Now the sanding drum is ready to use.

Are all Dremel bits interchangeable?

Yes and no. All Dremel attachments can be connected to Dremel rotary tools with a threaded nose. But not all combinations of tool and attachment will work optimally. You can see here which tool will work with what attachment.

What are all the rotary tool bits for?

Rotary tools are often used for detailing work on wooden cabinetry and furniture. Typically, carbide rotary bits and router bits are the go-to bits for carving and etching. These bits come in many different sizes to suit any project.

What is a Dremel flex shaft?

The Dremel Flex Shaft features a flexible 36-inch cable with a 5-inch bend radius, allowing you to comfortably reach your work in a variety of angles. The ergonomic comfort grip hand-piece reduces fatigue and allows for fingertip control to cut, grind, sand, sharpen, polish and more.

How do you attach a Dremel flex shaft to a Dremel 200?

Unscrew the collet and collet nut from your compatible Dremel Multi-Tool, screw it onto the Fexible Shaft and insert your desired accessory, using the shaft lock button on the Flexible Shaft. Make sure to tighten your accessory.