Hello, the radiator drain plug will be a the bottom edge of the radiator, facing the engine (passenger side). If you drain the coolant, be sure to catch it with a pan of some sort, and properly dispose of it.
What size are radiator drain plugs?
Radiator Drain Plug (10 X 1.5 mm)
What is a radiator blanking plug?
First things first; a blanking plug (or the very similar bleed plug) is a small, elegant looking plug – either circular or hexagonal – that you usually find at the top of a radiator, on its side, so at a 90°-angle to a wall.
What are the different parts of a radiator?
A radiator has three main parts: the core, the pressure cap, and the outlet and inlet tanks.
How do you drain a radiator without drain plug?
There is a screw on the bottom of the expansion tank. It should be blue or green. Open from there, drain (open your exp tank cap), and open your engine block drain plug once that’s done.
What is the radiator cap?
The cap regulates the maximum pressure, preventing damage to the hoses and radiator. After turning the engine off, the system cools and the coolant contracts significantly. The cap therefore has a return valve that admits air from the atmosphere or coolant from an expansion tank, if fitted.
How do you drain the coolant on a 2011 Chevy Cruze?
The drain valve is located on the passenger side of the vehicle, to the side of the radiator. It will look like this: Fit a hose over the barbed fitting, place a bucket underneath the hose, and open the valve. It should loosen by hand.
How do you drain the radiator on a 2008 Nissan Altima?
How to Flush the Radiator in a Nissan Altima
Park the Nissan Altima on a flat surface and set the parking brake. Twist the radiator cap one turn to relieve any pressure. Place a bucket or tray with at least a 2-gallon capacity underneath the radiator and below the drain plug.
What is a bleed plug?
A bleed valve is a valve that typically utilizes a threaded bleed screw to open or close. Generally, these valves vent pressure or release media from within a system. This is often necessary before starting maintenance work on a line that contains pressurized liquids or gasses.
Do radiators leak when they need bleeding?
Bleed valves are very common sources for leaks and relatively easy to put right. They tend to come about because the spindle-packing inside the little bit of radiator kit that’s the valve has got damaged or may have worn out.
