The soffit is the material beneath the eave that connects the far edge of your roof to the exterior wall of your house. They are often vented. Besides being underneath your eaves, soffits can also be on the underside of a porch roof.
What is a soffit vs fascia?
An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.
What part of the roof is the soffit?
The soffit is part of the overhang where your roof meets your siding. When rain or snow hits your roof, it runs down, and the overhang allows the water to flow away from your house. The soffit is underneath the overhang, between the roof’s edge and side of your home—the bottom of the triangle, if you will.
Is a soffit and eave the same thing?
To summarise, an eave is part of a roof system and a soffit is part of the eave. In simple terms, eaves and soffits are two different parts of the same structure.
What is the area under the roof called?
Soffit—The area that encloses the underside of that portion of the roof that extends out beyond the sidewalls of the house.
What is the overhang on a house called?
What Is a Soffit? Your roof by necessity, will often times extend over the walls of your home. This overhang can go by a few names, such as the house eaves or the rafters of your roof. The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”.
What is the board under the eaves called?
The vertical board that hangs down from the edges is called the “fascia board”. The Fascia, which derives from the same word in Latin (meaning doorframe), serves as a finishing edge that serves both as a decoration and protector for your roof.
What are the boards on the outside of a house called?
Definition of Fascia board or fascia trim: The horizontal board running along the outer edge of a soffit, typically covered or mostly covered by a gutter on modern homes, is the fascia board.
What is a Bargeboard on a house?
Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
What is it called where a roof meets a wall?
A headwall is a level junction where a roof meets a wall. This illustration shows proper flashing at a headwall condition. Headwall flashing should extend up behind the exterior wall covering and down over the roof-covering material, as you see here.
What is the wood around the roof called?
Roof edge (or eaves edge)
All the boards running along the edge of the roof or eaves. Also known as a fascia.
What is the trim on a soffit called?
Frieze boards are horizontal trim members you see at the top of your siding right where it meets the eave or soffit line.
What do you call the eve of house?
Eaves are the horizontal section of a roof that extends beyond the outside wall of a structure. Eaves are the horizontal section of a roof that extends beyond the outside wall of a structure. The sloped connection between a gable or shed roof and an exterior wall is called a rake.
What are Gables on a house?
Gable: A standard gable is a slanted or pitched roof that creates flat areas on the front, side or back of the house known as a gable. Homes can have multiple gables. Gable with dormer: Many gable roofs include a dormer, which is a structure that protrudes from the flat wall of a house.
What’s the difference between a soffit and an Eve?
To summarise the difference between the two in a construction context, the eave is an area of the roof which overhangs the walls, whereas the soffit is the underside component of this area only.
What is the board called under the gutter?
The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters.
What is the spine of a roof called?
Rake and Ridge
Essentially the spine of a conventional stick-framed roof, the ridge board is sandwiched between the meeting ends of the roof rafters. Here is a little trivia: Spelled “hryge” in Old English, the word was first used in reference to house roofs in the 16th century.
What is the difference between fascia and flashing?
Flashing prevents leaks and protects the deck (the first layer of roofing) and underlayment, which is usually tar paper. Fascia is a flat board or band located on the front of your roof’s overhang. It is connected to the trusses or rafters of your home.
