On average 72 hours minimum. Depending on the surface, number of layers and age of coatings you may be required to leave Peel Away on longer on old buildings, 5-7 days in some cases.
How long do you leave Peel Away 7 on for?
Dwell time will be as determined by the test patch, between 1 and up to 48 hours depending on paint types, thickness and temperature.
Is Peelaway any good?
5.0 out of 5 stars Excellent paint stripper – worth the money! Stripped about 20 odd layers of paint off 2 cast iron fireplaces with this. I think I slopped this on quite thick, so I needed about 1 and 1/4 tubs in total, but I am sure I could have done it with just one 5kg tub if I had been more economical with it!
Can you leave Peelaway on too long?
Leaving on too long could damage the substrate or you may find the Peelaway® blanket and paste becomes too hard and difficult to clean up. Once a small test patch has confirmed that the Peelaway® product selected has worked we strongly recommend that larger areas are tested before starting your stripping project.
How do you use peel away 7?
Peel Away®7 can be used on virtually all interior and exterior surfaces, and is excellent for intricate, carved and molded surfaces. Peel Away®7 paste is brushed, rolled or sprayed over the surface to be stripped, and covered with Peel Away® Paper for the time frame (dwell time) determined during patch testing.
Can I use PeelAway on glass?
Preparation: Cover and protect areas where
Plants and other foliage should be covered during application. For interior use, use polyethylene and masking tape to cover and protect adjacent sur- faces, including flooring. Note: Peel Away®1 will not affect glass or plastic surfaces, but will etch aluminum.
Can you use cling film with PeelAway?
Answer: Cling film works pretty well with peel away 1.
Is PeelAway toxic?
INGESTION May cause burns in mucous membranes, throat, oesophagus and stomach. SKIN CONTACT May cause serious chemical burns of the skin. EYE CONTACT Causes burns. ECOTOXICITY Not regarded as dangerous for the environment.
How long does PeelAway take to work?
Product can dwell 12-48 hours if necessary. Peel Away® 1 provides an average spread rate of approximately 20 Sq. Ft. per gallon; results may vary based on substrate texture and porosity and remover thickness.
How do you remove dried on Peel?
The residue should not be difficult to remove by brushing gently with a soft bristled brush and water – toothbrush style brushes can work well for small crevices.
How do you neutralize PeelAway?
Mix 1 part Neutraliser with 1 part water. Pour water into empty bucket then carefully add equal portion of PeelAway Neutraliser. For plaster surfaces, dilute 4 parts water to 1 part PeelAway Neutraliser. Pour diluted neutraliser into a garden type pressure sprayer or for smaller areas a hand-held trigger sprayer.
How long does Peelaway 1 last?
Product description: Peelaway® 1 Paint & Varnish Remover is formulated to remove multiple layers of old toxic lead paint from ornate plaster ceilings and cornices, bricks, masonry, steel, cast iron and woodwork. Water based alkaline formulation. Works for up to 48hrs.
Is Peelaway 1 Safe?
Peel Away 1 can remove up to 30 layers in one application. Suitable for removal of oil and lead based paints it provides safe lead containment and is a recommended system by the EPA.
What is Peelaway made of?
All Peel Away® 1 containers contain a complete paint removal kit, including Dumond® Laminated Paper, Citri-Lize™ Neutralizer, a pH test kit, and a plastic applicator under the lid.
