Jigsaw + special Laminate Cutting Blades
The jigsaw is the best power tool to use to cut laminate floors with for a few reasons. It’s light, important because you’ll be picking it up all day. Also, the best blades are cheap.
What tools do you need to cut laminate?
In fact, you can cut the planks using a table saw, miter saw, circular saw, hand saw or laminate cutter. However, using a diamond blade is recommended as laminate can be tough to cut through and may damage another type of blade. Typically, you will cut with the finished side up.
Do you need a special blade to cut laminate?
Blades for Laminate Flooring
In view of this, a thin kerf, 80 to 100 tooth, carbide-tipped blade is most effective for cutting laminates and will last for about 1000 sqft before needing to be re-sharpened.
Can you cut laminate with a utility knife?
Yes. You can cut laminate wood flooring with a utility knife. The utility knife has all the power and cutting capacity to cut through laminate wood flooring whilst not chipping the blade off.
How do you cut laminate with a Stanley knife?
Laminate floor can be cut with the Stanley knife but it is not able to cut the whole way through the floor. Rather, the Stanley knife is used to score the laminate side of the floor and then the floor is snapped off at that line. Most people tend to interchange the use of Stanley knife and utility knife.
Can oscillating tool cut laminate flooring?
This blade would be a good choice for plunge cutting in laminate flooring as well as flush cutting door jambs and casings. The fine-tooth version is a good choice for plunge cuts in drywall when, for example, installing electrical boxes.
How many teeth blade for laminate flooring?
Number of Teeth
However, typical circular and miter saw blades that are used for laminate will have 80 to 100 teeth for fine, precision cutting.
What kind of blade do you use to cut laminate countertop?
Making Straight Cuts in Laminate Countertops
The best DIY tool for the job is a circular saw with a fine-tooth carbide blade made for laminate (the same blades are typically sold for non-ferrous metals and other types of plastics). You can also use a jigsaw with a fine-tooth blade.
Is laminate flooring hard on saw blades?
Tooth Material
The composition of laminate flooring, especially the aluminum oxide in the overlay layer, is very hard on saw blades. (Aluminum oxide is what makes up the grit on most common sandpaper, after all.) You absolutely want a carbide-toothed saw blade if you’re cutting more than a couple planks.
Can I cut laminate with a jigsaw?
A jigsaw is a real all-rounder when it comes to cutting laminate floors. It’s best used to cut out shapes from your board. For example, when you want to place boards around your toilet or maybe a pillar. Always use a fine toothed blade and have the saw blade spinning before you touch the board.
Can you cut laminate sheets with scissors?
Laminate sheets are approximately 1/16 inch thick but can be harder to cut than other materials. If you don’t have a utility knife, you can try a pair of heavy-duty scissors instead. There are scissors for laminate sheeting; they look more like shears and make single, straight cuts.
Can a jigsaw cut laminate countertop?
The Bosch T101BR jigsaw blade is an ideal choice for cutting laminate materials. The blade cuts on the down stroke, not on the upstroke, the “R” in the product code referring to its “reversed” teeth.
