In the US, the standard curtain width would be 54”. But generally, it ranges from 50-58”. Some curtain manufacturers even go for as long as 108”. Again, knowing the curtain width is as essential as the length because you have to align it with standard curtain sizes.
How wide should curtains be for 72 inch window?
To get the measurements, measure the width of the rod from left to right. For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.)
How wide should curtains be for 60 inch window?
For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
How wide should curtains be for 36 inch window?
Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full. Always round up to the next full number.
What is the most popular curtain size?
While size varies depending on your window size, likely the most common standard curtain length is 95-96 inches. This single size is sometimes labeled as 95-inches and sometimes labeled as 96-inches.
Should curtains be double width of window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How wide should curtains be for 80 inch window?
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you’re hanging curtains just to frame a window and don’t intend to shut them, you can round down to 1½ times the width.
How do you measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
What size curtains do I need for a 100 inch window?
How Wide Should Curtains Be For A 100-Inch Window? The average curtain bought to hang on a 100-inch window should measure between 200 and 250 inches wide. To achieve appropriate fullness with thinner material, get curtains upward of 300 inches wide.
How far should curtains extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How far past window should curtains hang?
How High to Hang Curtains. A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly.
Do curtains need to touch the floor?
Yes, They should! The length of the curtain determines the height of the curtain rod. Therefore, even if you buy curtains that are 84 inches long, if the curtains hang from the rod without rings, the rod must be approximately 84 inches from the floor to enable the curtain to touch the floor and avoid the awkward look.
Is curtain width for both curtains?
You should choose the width that most closely matches the size of your track or pole. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
How many curtain panels do I need for one window?
Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.
What is the right length for curtains?
If you are interested in stationary panels, you will want your curtains to be long enough to lightly brush the floor, but not so long that they bunch up in a pile. A good rule of thumb is for your curtains to break anywhere from a ¼” to ½” from the floor, similar to a break in pant legs on your shoe.
