GacoRoof’s 50 year limited warranty guarantees that GacoRoof coating will last the lifetime of the substrate where it is applied, as long as it is applied according to instructions.
How do you apply GACO deck coating?
While coating is still wet, center the strip of DeckTape over the seams, joints, cracks and flashing. Embed smoothly into the coating. Immediately brush another layer of coating over the DeckTape, smoothing out any wrinkles with a brush. Verify the DeckTape is completely covered with GacoDeck TopCoat.
Can I paint over GACO deck?
GacoDeck Primer can be applied over previously coated and painted surfaces, existing waterproof deck systems and substrates in cold climate zones. WARNING: DAP Dynaflex 230® referenced in the GacoDeck application video is no longer a compatible product with GacoDeck.
Can you pressure wash GACO deck?
Can my GacoRoof be pressure washed? You can pressure wash GacoRoof at a low pressure (below 2,500 psi).
How long does GACO take to dry?
Allow the first coat to dry for 3 to 12 hours. Apply second coat as soon as the first coat can be safely walked on. Do not apply in temperatures below freezing, above 120°F (49°C) or if rain is expected within 2 hours.
Can GACO be applied to wood?
GacoFlex U5677 is a single-component, moisture-cured polyurethane sealer that can be applied directly to concrete, wood, aluminum and epoxy primer.
Can you paint GACO?
CAN A ROOF COATED WITH GACOPRO OR GACOPRO ECO BE PAINTED OVER? Given the fact that GacoPro is a Silicone material, it is not possible to overpaint with anything except a new coat of GacoPro.
What is GACO deck?
GacoDeck® Kit is a water-borne, single component waterproof deck system that can be applied over plywood, concrete, metal, fiberglass and previously coated decks. The coating is designed to create a fully adhered, durable waterproof membrane that expands and contracts along with the substrate.
How do you use GACO patch?
Apply to patch area at a minimum wet thickness of 1/8” (3.2 mm) and spread at least 3” (76.2 mm) in all directions from the affected area. For cold weather applications (ambient temp
Can you walk on GACO roof?
Do not walk on GacoRoof other than for periodic maintenance; for areas of light foot traffic, create a walking path by applying a coat of LiquidRoofTape according to label instructions. Application tools and equipment can be cleaned with GacoFlex Silicone Solvent or 100% pure mineral spirits.
Can you paint over GACO patch?
It is not intended to be painted or covered over with any product other than Gaco Silicone Roof Coatings. CLEAN-UP: Application tools and equipment can be cleaned with GacoFlex Silicone Solvent or 100% Pure Mineral Spirits. DO NOT USE WATER OR RECLAIMED SOLVENTS.
Can you paint over silicone roof coating?
It takes some practice, but if you can paint a wall you can coat a roof with silicone. It can get messy, but if you have proper cleaning equipment (towels, mineral spirits) handy, it won’t get too messy.
How much does a 5 gallon bucket roof coat cover?
A: on average, a five-gallon bucket of roof coat will cover about 250aquare feet using two coats; alternatively it can cover an area of 500 square feet for one application.
Can you walk on silicone roof?
It is possible to walk on silicone roofs two to six hours after coating, in normal environmental conditions. However, be extremely cautious while walking on a silicone roof coating as they tend to be very slippery.
Does GacoRoof need primer?
The unique chemistry of GacoRoof offers peace of mind for a lifetime! It outperforms and outlasts acrylic, urethane, asphalt and Hypalon® coatings. NO PRIMER REQUIRED. GacoRoof will adhere to most surfaces without a primer including built up roofs, cap sheet, metal, modified bitumen and sprayed polyurethane foam.
