Smoke guards and fireplace doors work by lowering the top of the fireplace opening, adding extra space for the smoke as it collects prior to passing through the damper. This solution often helps reduce or eliminate constant fireplace smoking.
Do curtains block smoke?
Unlike other smoke control equipment such as outdoor exhaust vents, smoke curtains provide a physical barrier against smoke.
How does a smoke curtain work?
A smoke curtain is used as part of a smoke control system. It is there to either stop smoke from reaching another zone or channel it through a particular route. Smoke Curtains don’t descend to ground level (ceiling to floor). They are generally set above head height, so as not to interfere with the means of escape.
Do I need a smoke guard?
If smoke gets into your room when you have a fire going, it might be from a flue being sized too small for your fireplace’s opening. The smoke guard can be used to reduce the height or width of the fireplace. Most fireplaces smoke because the opening is too high.
How big of a smoke guard do I need?
To determine the proper size smoke guard, we must first determine the ideal height of the fireplace opening. The typical formula is to take the width of the fireplace opening and multiply that by 0.75. The height of the fireplace opening should be no greater than that amount.
How do I stop the fireplace from smoking in my house?
How To Keep Smoke From Coming Out Of A Fireplace
Use A Fireplace Grate. Build Fires Towards The Back Of The Fireplace. Build Fires Using The Top-Down Method. Burn Dry & Low Moisture Content Firewood. Open The Damper Fully Before Each Fire. Preheat The Chimney To Start The Draft. Build Smaller, Hotter Fires.
Do fireplace doors reduce smoke?
One of the first benefits from installing a glass door onto your fireplace is preventing smoke from entering your home. Smoke from burning wood is harmful to your lungs and you home, it can stain your ceiling, and it can be a hard to get the smell of smoke out of your clothes and furniture.
What is a smoke baffle?
What Are Smoke Baffles? Also known as smoke curtains and draft curtains, a smoke baffle is used to contain and direct smoke. They’re typically installed at the tops of stairways, atriums and other open or high-ceilinged areas.
What is the difference between fire curtain and smoke curtain?
Smoke curtains are not usually full height but are set at a drop height to allow people to evacuate. A fire curtain provides complete fire separation between building zones. They are often utilised to protect open stairways as a protected means of escape.
What is a fire curtain?
Fire curtains are a type of active fire protection – meaning that they respond to the presence of fire. Other types of active fire protection include sprinkler systems, alarms and smoke curtains. Although they’re an active system, fire curtains are used for compartmentation.
What is a smoke curtain made of?
Galvanized steel is typically used in Smoke Guard curtains. Galvanized steel is one of the more robust metals in terms of its ability to withstand many different environments, an important feature for curtains that are exposed to different elements and climates all over the world.
What are fire curtains made of?
A safety curtain (or fire curtain in America) is a fire safety precaution used in large proscenium theatres. It is usually a heavy fibreglass or iron curtain located immediately behind the proscenium arch.
What are fire shutters?
A fire-rated door or counter shutter is a barrier designed to prevent flames or hazardous smoke from spreading during a fire. These doors have ratings based on how long they are proven to withstand a fire. You can order Cookson steel roll-up doors with fire ratings of 45 minutes, 90 minutes, three hours or four hours.
Why is smoke coming into house from fireplace?
One of the most common causes of a fireplace smoking back into the home is due to poor quality firewood. This usually slips past homeowners and they think that their back puffing problem is from something relating directly to a fireplace or chimney part.
How do you measure a fireplace for a smoke guard?
Measure the length and height of the fireplace opening to determine the size of the sheet metal needed. The average height of a fireplace opening ranges from 24 to 32 inches; smoke guards typically range between 4 and 8 inches in width.
Why does my fireplace smell smoky?
A: The odor is from creosote. Your chimney may need cleaning. But it also could be that your chimney is having trouble drafting, due to creosote buildup or pressure imbalances within the house, rather than outdoors.
