Reset the indicator light by pressing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button. If your model has an inside control panel, hold the “Power Cool” and “Fridge” buttons simultaneously for 3 seconds. This will reset the indicator light back to blue.
How do I reset the filter on my Samsung Fridge Freezer?
To reset the water filter alert system, press and hold the Ice Type / Filter Change button for 3 seconds. If you decide you do not want to use the water filter, press and hold the Ice Type button for more than 5 seconds, the Filter Indicator and the Filter Change display will be switched off.
Where is the reset button on a Samsung refrigerator?
Samsung fridges that don’t have a dedicated reset button can usually be reset using a standard key combination. Press and hold the Power Cool and Power Freeze buttons simultaneously for five seconds. If the reset has worked, you’ll hear a chime, and the fridge will start back up with the default settings.
Why is my water filter light still on?
There is a very slim chance of a water filter being defective. Instead, the most common reasons are that the change light needs to be reset. Typically, this light is a timer meant to remind you to change your filter every 3 to 6 months.
Why is the filter light on my Samsung fridge?
A Samsung refrigerator has a filter indicator light to inform you when it is time to change the water filter. The light starts out in a blue color, indicating a fresh filter. The light changes to purple once the filter is five months old. When the light turns red, the filter requires changing.
How do I clean the water filter on my Samsung refrigerator?
Dish soap or water and vinegar mixture work, or you can buy solvents specifically for cleaning water filters. Let the filter soak for 10 – 30 minutes, depending on how soiled it is. Then rinse under a gentle stream of water until the water coming out of it is clear.
Do you have to turn the water off to change a refrigerator water filter?
Yes, you can replace the filter without shutting off the water supply.
How do I reset my Samsung side by side refrigerator?
Reset your refrigerator: First, unplug it (or turn off the power at the circuit breaker), and then wait about five minutes for the electrical charge to clear out of it. Then, power it back on again.
How long do I unplug my fridge to reset it?
For the best results, use the hard reset method. Unplug the refrigerator and leave the appliance undisturbed for 45 to 50 minutes. Set the timer on your phone so you don’t forget to plug it back into the wall outlet. While the refrigerator is unplugged, do not open the doors.
How do I turn off the lights on my Samsung refrigerator?
The button is located on the left side of the freezer wall. Simply tape the button down to turn the lights off. It’s important to note that if the refrigerator thinks the doors are closed when in fact they are open, the fan may come on with the door open and dissipate all the cold air from inside the unit.
