DSC alarms can go off for a number of reasons. To reset the alarm or the warning lights, enter your master code twice, press the reset button, and then enter “*72” if the alarm is still ringing. Once the alarm is off, try to find out why it went off.
What does the yellow trouble light on my DSC keypad mean?
This indicates that the alarm panel is not able to detect the phone line connection. Please ensure that your telephone system is up and operational. If it is not, contact your telephone carrier to resolve.
What does trouble mean on DSC alarm?
The trouble light is an indication that something is not functioning properly on your DSC security system. When a trouble is present the system trouble indicator light will illuminate and the keypad will beep every 10 seconds. To silence the trouble beep simply press the # key on the keypad.
How do you check the trouble on a DSC alarm system?
How to Acknowledge and Check a Trouble Condition DSC Power Series PC1616, PC1832 and PC1864
Press the # key to silence the beeping that accompanies the trouble.Should the Trouble Condition light be active on your system, Press * 2 to enter the Trouble Condition Menu.The Trouble Light will flash.
How do I get rid of the yellow triangle on my DSC alarm?
Press the ‘7’ key and you will receive a number corresponding to the affected zone. The indicated zone is reading a low battery condition and needs a replacement battery. Replace the battery in the contact and the condition will clear.
How do I stop my DSC alarm panel from beeping?
NOTE: Pressing [*][2] will stop the keypad from continuously beeping. However we recommend you contact your service provider to fix the trouble condition as soon as possible.
What does yellow triangle mean on alarm?
The yellow triangle means that your alarm system is experiencing a trouble condition. This could be caused by a number of different possible factors, such as a low battery, an activated tamper or communication problems. Only certain alarm systems use a yellow triangle to indicate a trouble.
Why is my DSC alarm keep beeping?
Some common beep-inducing issues include low battery indications, battery failure, phone line failure, and communication issues. Before you do anything, make sure that your system is disarmed. Then, to determine the condition that’s troubling your DSC alarm, press the * key followed by the number 2.
How do you reset a DSC panel?
How to Reset a DSC Alarm After the Power Has Been Off
Press and hold the “RESET” key for 2 seconds.Press the buttons “*72” if the alarm does not reset after pressing the RESET button.Check the sensors if it still does not turn off.
What does a triangle with an exclamation mark mean on a thermostat?
A bump test or calibration is overdue.
