What is Flocculant? Flocculant, or pool floc as it’s sometimes called, is a chemical that you add to your pool when other methods of clearing it up aren’t working. The flocculants clump together floating particles in the water that are too small and light to sink to the bottom to be vacuumed up.
Can you put too much floc in pool?
Flocculation refers to suspended particles in the water that give it a murky appearance. Flocculants are substances that help clear the cloudiness and restore the clarity to your swimming pool water. You can use too much floc, however.
How long does it take for floc to settle?
It just coagulates the tiny particles in the water so they can settle out or be filtered. It’s the last step after everything else is fixed. That being said, Floc takes 24-48 hours to settle out with the pump OFF.
How long does pool flocculant take to work?
Pool flocculant can clear up your cloudy pool water in 1 or 2 days. Though it works faster than pool clarifiers, it will need 8 to 16 hours to clump together the particles before you can vacuum.
Can you shock and floc at the same time?
Answer: Shock can be added at any time. Especially since you are treating a green pool. The hot sun can tend to burn off chlorine faster, but the green pool needs to be treated and the sooner, the better. The chlorine will remain high for a few days after shocking anyway whether or not the sun is out.
How does pool floc work?
Pool flocculants, also known as flocc, make quick work of clearing up your cloudy pool water. After being added directly to the pool water floc causes cloudy water particles to clump together and sink to the bottom of your pool. Your job is to then vacuum the clumped up “clouds” from the bottom of the pool and voila!
Can you swim after flocking a pool?
It is recommended that you do not swim in the pool whilst using flocculant. The water needs to be still and not moving for the floc to work. Otherwise, the floc may not effectively clump together.
How often can you flock a pool?
You should be turning your pool over – moving your entire pool volume through your filter – at least twice a day (three times a day for a commercial pool).
Can I still swim in a cloudy pool?
For the most part, yes. It can be unattractive and it should be addressed, but it is mostly safe to swim in cloudy water. The only exception would be if the pool is cloudy because there are too many chemicals in it. This pool water would be unsafe to swim in and should be avoided.
How do you vacuum a pool after floc?
Our Pool Floc Hot Tips
Floccing is best done in the evening: you can add the floc, run the pump for 2 hours, then leave it for 8 hours overnight and vacuum the next morning. Vacuum slowly! Usually while vacuuming to ‘Waste’, you can run the garden hose into the pool to keep the water level the same.
Is pool clarifier the same as floc?
The main difference between the flocculant and pool clarifier is where the clumped particles go. Clarifier keeps the bounded matter at the top of the pool to be grabbed by the pool filter. Meanwhile, pool floc snags the particles, assembles them, and then sinks them to the bottom of the surface.
Why is floc not working?
Floc can’t take care of live algae. All of the algae needs to be dead before you try to use floc. There are some other situations where floc might not work completely the first time, but they are far less common. The most common of the uncommon cases is probably not using enough floc.
Can I use floc with a cartridge filter?
Flocculants cannot be used with a cartridge filter because they can wreak havoc on your filter elements. Flocculants also waste a lot of water since you will be vacuuming those clumped up particles to waste.
Can you flock a saltwater pool?
Can I use flocculant in a Saltwater Pool? Yes, flocculant will work on any water system.
What causes a cloudy pool water?
Excessive levels of pool chemicals can cause your water to become cloudy. High pH, high alkalinity, high chlorine or other sanitisers, and high calcium hardness are all common culprits.
Will floc ruin a sand filter?
There are 2 main points to remember when flocking your pool:
The correct ph level 7.2 – 7.4 is critical in getting the debris to fall to the bottom of the pool. Don’t run the floc through the filter as it will damage the sand or media in your filter.
Can I add clarifier and flocculant at the same time?
Do you use Clarifier in conjunction with Flocculant? Flocculant can be used after clarifier. However, using too much of any product can work against the clarifying process.
What is floc in water treatment?
What is flocculation? Flocculation is the separation of a solution, commonly the removal of sediment from a fluid. The term is derived from floc, which means flakes of material; and when a solution has been flocculated, the sediment has formed into larger aggregated flakes, making them easier to see and remove.
How soon can you swim after adding flocculant to pool?
You should only swim after the particles have sunk and been removed from your pool floor. The entire process of adding flocculant will likely just take one day – but if you or your children are dying to get in the pool, a clarifier will be your best choice.
