Plug the timer into an electrical outlet and connect your light. Put the programmed timer into any free electrical socket. Plug the power cord from a lamp or other light fixture into an outlet on the timer and turn the light’s power switch on so the timer will turn it on and off at the times you programmed.
How do you set a 24 hour light timer?
How do I Set a 24 Hr Light Timer?
Verify that your lights and switches are working before attaching the light timer. Turn the light switch to the “on” position.Plug the light timer into the wall outlet.Set the dial to indicate the current time of day.
How do you set a light timer with pins?
Position the first pin to the time you want the electrical item to come off, setting the second pin to the time you want it to turn off. For example, if you want the timer to turn a light on at 7 p.m., set the first pin at that position on the dial and the second at 11:00 p.m. if that is when you want it to shut off.
How do you set a timer for outdoor lights?
Outdoor outlet timers, both mechanical and photoelectric are very simple to install. All you do is plug them into the wall outlet, then you plug your lights into the timer. You can easily change the settings of these types of timers with mechanical knobs and/or push buttons.
How do I set the timer on my fairy lights?
Method B: Timer button on Remote Control
When using for the first time, remove the protective transparent film covering the remote (as below picture) to activate the battery.Press ON or OFF button to activate or deactivate the lights.Press “4H”, “6H” or “8H” to select different timing period.
How do you program a smart electrician timer?
How do you set a Smart Electrician Timer?
First, position the “Time Now” arrow on the timer to the current time.Next, select the time you want the lights to go on. For example, 6 P.M. Press down the 6 P.M. Next, decide what time you want the lights to shut off. Then press down all the buttons in between those times.
How does an electrical timer work?
The electronic timer circuit counts the pulses of the oscillator, and makes certain actions happen when there have been a certain number of pulses. For example, a timer circuit in a watch would count pulses until a second has passed, then send a signal to display the next second, and restart the count.
