Side cutters are used to cut wire and the leads (or legs) of components in electronics. They can also be used to strip the insulation from wire.
What are side cutters also called?
Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters or side cutters or dikes or Nippy cutter) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything).
What is the meaning of side cutting?
Definition of side cutting
: material excavated outside the established slopes required for a roadbed.
What is the difference between side cutters and diagonal cutters?
Diagonal cutters cut straight through the material leaving a flush-cut while side cutters leave a sharp end. This makes dikes more suitable for cutting jewelry because they do not leave sharp ends. Sharp wire ends on jewelry can be injurious.
Are wire cutters and side cutters the same?
When would you use each if there is a difference? Answer: The term “flush” means level or straight and on the same plane, so flush cutters cut a wire level. Side cutters, or angle cutters, cut on an angle, meaning the wire edge will be cut to one side.
What are the different types of cutters?
The most common types of milling cutters are:
End mill.Face mill.Ball cutter.Slab mill.Side-and-face cutter.Involute gear cutter.Fly cutter.Hollow mill.
Are side cutters also called dikes?
49. The diagonal cutting pliers, commonly called “diagonals” or “dikes”, are designed for cutting wire and cotter pins close to a flat surface and are especially useful in the electronic and electrical fields. 1996 Bruce Caldwell “Auto Upholstery & Interiors” p. 15.
How many types of cutters are there?
There is a wide selection of different types available. They can come in various sizes and feature a range of pincers and joints, with the three basic types being locking, adjustable, and non-adjustable. These tools are typically made from steel.
What is the meaning of hack saw?
Definition of hacksaw
: a fine-tooth saw with a blade under tension in a frame that is used for cutting hard materials (such as metal)
What is the meaning of plier?
Definition of pliers
: a small pincers for holding small objects or for bending and cutting wire.
What are lineman pliers used for?
Lineman’s pliers are used by electricians to straighten, cut, grip, twist, push, and pull wire. They are used to cut and bend light gauge metal and pull staples and nails. The angular edges on the outside edge of the jaws are designed to ream down ridges and burs on the inside lip of cut pipes.
What is side cutter plier?
Diagonal cutting pliers are used for cutting wires, screws and nails. They are known by many different names: side cutting pliers, side cutters, nippers and wire cutters, to name but a few! They are called diagonal cutting pliers because the cutting blades are at an angle to the handles.
What tool is called a dyke?
Dykes 4.5″ Side Cutter Diagonal Wire Cutting Pliers Diagonal Wire Cutter Side Cutting Pliers (wire cutter)
What is cable cutter?
Cable cutters or wire cutters are usually hand-held tools requiring a simple one or two handed operation, using two steel blades to cut through wires or cables, similar to a pair of scissors.
