The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a four-bolt pattern. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.
What vehicles have a 4L60 transmission?
Applications
Buick Rainier, 2004-2007.Buick Roadmaster, 1994–1996.Cadillac Escalade, 1999-2000, 2002-2005 (models with LM7/5.3L V8 Also with 6.0 LQ9)Cadillac Fleetwood, 1994–1996.Chevrolet Astro, 1993-2005.Chevrolet Avalanche, 2002-2008.Chevrolet S-10 Blazer, 1994-2005.Chevrolet Camaro, 1994–2002.
Is a 4L60 the same as a 700R4?
You can’t tell the difference between a 700R4 and a 4L60E by the oil pan as they are nearly the same. If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. If it has a cable connection near the cooler lines on the passenger’s side, that’s a 700R4.
What years did GM use 4L60?
The key distinction of the Later 4L60-E (1996-2010) from the Early 4L60-E (1992-1997), 4L60 (1990-1992), or 700R4 (1982-1989) is the six-bolt “hex” rear output or tailhousing / adapter pattern.
Does a 4l60 need a computer?
Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. On “E” transmissions, the computer controls everything: TCC lockup, gear changes, shift quality and firmness, and line pressure.
How much power will a 4L60 hold?
Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.
What year did 4L60 start?
Introduced in 1993 for trucks, vans, and SUVs, then in 1994 for rear-wheel-drive passenger cars, the 4L60E from General Motors is an evolution of the Turbo-Hydramatic 700R4 and replaced the tried and true TH350.
Is the 4L60E a good transmission?
having run the gamut of transmission options out there, IMO, the stock 4l60 is just fine for 99% of trailblazer owners. if its high mileage, what are you going to do? friction material wears out. it won’t last forever.
How do you tell if a transmission is a 700r4?
Identification Tag
The safest way to determine if you have a 700r4 transmission is to look at the identification tag on the transmission. You will find it on the rear side of the transmission on the passenger side.
Is a 4L60 a 4 speed?
The 4L60E is one of General Motors’ most versatile and durable 4-speed transmissions. It was formerly known as Turbo-Hydramatic 700R4 and is currently the electronic version that is popular today: 4L60E. General Motors manufactures the remarkable 4L60E in Romulus, Michigan, and Toledo, Ohio.
How do I know what transmission I have?
Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.
Does the 4L60E have a kickdown?
The 4L60E has no kickdown or TV cable, and all of that work is done through solenoids that are run thanks to a VSS at the back of the transmission.
Will a 350 bolt up to a 4L60E?
Will A 350 Engine Work With A 4l60e? A premium member gets access to exclusive benefits. You will be able to bolt straight up to your 350 with the 4L60E. Yes, but you will need some sort of control over the tranny.
Does a 4L60E have a detent cable?
I mean that the 4L60E tranny is computer controlled, it doesn’t use a cable, but is tied into a powertrain control module that is integrated into the engine electronics. They may a stand-alone box if you want to run a carb.
