It’s imperative that you use a drill designed for making holes in stone, concrete or brick. That means you’ll need a drill with a hammer mode. Failure to use a drill with hammer function will result in the damage of your tool, or it simply not being able to get the job done.

What does a masonry bit look like?

Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them thanks to their wide arrow-shaped heads. They’re commonly used in hammer drills to grind masonry down as they cut through it. You can use them on brickwork, stone, breeze blocks, and other hard stone surfaces.

Do you need a masonry bit for brick?

You just need the tools and the right technique for how to drill into brick. Typically, all it takes is an ordinary drill to bore a few small 1″-deep holes (each a ¼-inch in diameter or less). Just buy a carbide-tipped masonry bit from your local hardware or home center and follow the steps below.

Why won’t my drill go through brick?

The most common reason a drill won’t penetrate a wall at all is because the drill is spinning in the wrong direction. If the drill bit enters the wall and then hits resistance, the typical cause is a metal plate or masonry obstruction.

What Colour are drill bits for brick?

Masonry bits have a toughened tip which is quite different to normal twist drills. There is no special colour. Most masonry bits we use are plain grey or silver. Take a look at the screwfix website and search for masonry bits then twist drill (also called high speed steel bits).

How do you drill a hole in brick without cracking it?

To drill into brick without breaking it, you need a Carbide drill bit that has an abrasive surface to cut through the material. Make sure that you chisel away any mortar or other cementation from both surfaces before drilling in order to have better results.

Can you drill into brick without a hammer drill?

To drill into brick without a hammer drill, you can use the masonry or concrete drill bits as an alternative option. You can also utilize an impact driver if it’s within your reach.

Can I use a metal drill bit on brick?

There are also different materials used to make the types of drill bits used for concrete, brick or tile. Almost all drill bits are made of metal. With few exceptions, metal bits are the most practical choice for every surface including wood, concrete, tile, glass and metal surfaces, as well.

Can I screw directly into brick?

The traditional way of fixing to masonry is to use screws, but you cannot screw directly into a brick, block, or stone wall so you need to drill a hole and then provide a material that can be screwed into but will also hold the screw firmly in place.

Should I drill into brick or cement?

Mortar. In only rare instances would you have to consider whether to drill into bricks versus mortar, the much softer material that sits between them. As a general rule, unless you’re hanging something very light (just a pound or two), always drill into brick.

What is concrete drill bit?

Masonry drill bits and concrete drill bits are solid drills that are suitable for drilling in various types of stone, such as brick, concrete and sand-lime brick. Our range consists of concrete drills with a cylindrical connection, SDS-plus connection and SDS-Max connection.

How do you tell if my drill is a hammer drill?

When you look at a hammer drill, it has an additional hammer mode you can switch into. Some models have the mode changes separate from the clutch collar and others keep them all on one collar. Regardless, the hammer mode is almost always right next to the drill mode.