Pegboard needs about 1/2 in. of ‘standoff’ space behind it so the hooks can be inserted.

Can you put a pegboard on drywall?

Pegboard goes up pretty easily and can be installed over drywall or even bare studs (such as in an unfinished garage). The trick to installing it is to create a 1/2-inch or larger gap between the wall and the back of the pegboard.

Do you need furring strips for pegboard?

Most pegboards need wooden furring strips mounted on the back to provide a gap so the pegs or hooks will fit properly. Use the pegboard measurement to determine the number of 1- x 2-in. furring strips you’ll need.

How do you frame a pegboard?

How to Make a Framed Pegboard with Custom Organizers
STEP 1: Add 2 Coats of Paint to the Pegboard. STEP 2: Stencil the Pegboard. STEP 3: Glue and Nail the Boards to Create the Frame. STEP 4: Fill Holes with Wood Filler and Sand. STEP 5: Add Finishing Coat to Frame. STEP 6: Cut the Pieces for the Organizers.

How do you cut a pegboard without a saw?

Best tool to cut Pegboard

Yes. If you have no circular saw for cutting a pegboard, you can use a utility knife for straight cutting a pegboard. You can even use a utility knife for cutting circles in a pegboard.

What can I use instead of pegboard?

Velcro Strips work well in the home or office as a pegboard alternative because they are light and easy to stick in place. Simply peel and stick the adhesive side to the wall and stick the other piece to the object that will be stored on the Velcro strip.

How do you make pegboard look good?

Building a frame is a great way to give a finished look to the edges so your pegboard looks more polished. If you aren’t into building your own, you can also have a custom frame built for it at a framing shop or buy as large a frame as you can find and then cut your pegboard to that size.

Does Lowes cut pegboard?

Lowes cut it to size at no extra charge.

Can I paint pegboard?

Once your pegboard is primed and sealed off properly, you’re good to use your favorite water-based or non-water-based paint to finish off painting your pegboard. Here’s how to paint a pegboard for the best results: Make sure the primer is completely dry before applying the first coat of paint.

How do you use a pegboard in a garage?

Hanging Your Garage Pegboard
Step 1: Find and Mark Studs. Step 2: Measure Space for the Board on Your Wall. Step 3: Pre-drill Holes Through the Board and Wall. Step 4: Measure and Mark Space for the Bottom Frame Board. Step 5: Repeat for the Middle Board. Step 6: Mount the Pegboard to the Frame Boards.

What are furring strips for pegboard?

But wait, what is a furring strip?!

They’re often used for cinderblock or concrete walls when you want to cover it up or attach drywall. In this case, furring strips are used to create some dead space between the pegboard and the wall so the pegs or hooks can fit.

How do you cut a pegboard by hand?

For cutting pegboard with a knife, use a tape measure to measure the wounds, and use a pencil and a ruler to map them out. Keep the straight edge aligned with the indicated cut line and firmly press down with your hand and knee or foot.

What is a furring strip?

In construction, furring (furring strips) are thin strips of wood or other material to level or raise surfaces of another material to prevent dampness, to make space for insulation, or to level and resurface ceilings or walls.

How big are pegboard holes?

When purchasing your pegboard, make note of the hole size. Some have 1/4- inch holes, while others have 1/8-inch holes. The hole size will determine the type of hooks you need. Your home center will have a wide assortment of pegboard accessories, all of which can be quite useful.