PVC or plastic soffits are generally the cheapest option at $6 to $12 per linear foot and are customizable. Wood is the perfect soffit material for homes with a classic look and feel, but it can cost more—$14 to $22 per section. Vinyl and aluminum soffits cost about the same as wood.
What size is a sheet of soffit?
While not all soffit board sizes are the same, the width of most soffit falls in the range of 16 inches to 24 inches when used to cover the eaves of the home. In addition, standard soffit sizes feature a ¼-inch thickness, too, which can help with installation.
Which is better vinyl or aluminum soffit?
Aluminum Soffits for Long Term Value
It is very easy to clean and maintain. You can buy it painted and vented for optimum air flow. Aside from cost, the main disadvantage of aluminum is its ability to dent under force. Also, it is not a good insulator like vinyl.
How much is a piece of soffit?
Soffit Costs
Soffits are usually sold in 12 foot sections with varying widths for an average between $10 to $23 per section or about $16, on average. This translates to about $1-$3 per linear foot.
What’s the difference between soffit and fascia?
An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.
How many pieces comes in a box of soffit?
Triple 4˝ packaged 16 pieces, 12´0˝ long, 1.92 squares per carton.
How do I calculate how much soffit I need?
Multiply the total length by the width to obtain the area of soffit needed to fill the gap. For example, if the total eaves length is 110 feet, and the width is 2 feet, multiply 110 by 2. The result, 220 in this example, is the number of square feet of soffit required.
What wood is used for soffits?
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.
How tall should a soffit be?
Standard Ceiling Space
Take your kitchen’s ceiling height into consideration. Soffit space should begin 84 inches off the kitchen floor. This means that a typical soffit for an 8-foot tall kitchen will be 12 inches high.
What can you use for soffit?
Soffit Material Options
Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. Aluminum. Fiber Cement.
What type of soffit is best?
Aluminum soffits are popular for many reasons. They are highly durable, lightweight, and easy to handle. If your overhangs feature irregular shapes, aluminum soffits are a great option because they are highly malleable.
What is cheaper aluminum or vinyl soffit?
Aluminum does cost a little more than vinyl, but it is still quite economical, as it is cheaper to produce than 80% of other materials. Under the right conditions, heavy gauge metal siding can be applied right over your existing siding.
Does vinyl soffit look cheap?
Potentially less attractive: Some people find vinyl to look cheaper than other soffit materials.
How often should soffits be replaced?
There is no definite timetable for replacing a soffit or fascia, but there are some signs that roof repair contractors look for when evaluating your roof’s overall health.
Does soffit need to be vented?
So, does my roof need soffit vents? A roof may need soffit vents if there is no other ventilation allowing for adequate air movement. However, if the attic space is properly sealed and insulated, there is no need for this type of ventilation. There is no question that a standard attic space should be vented.
What is the difference between eaves and soffits?
To summarise, an eave is part of a roof system and a soffit is part of the eave. In simple terms, eaves and soffits are two different parts of the same structure.
