Flat Sheets & Facades
Nutec Flat Sheets are an economical, multi-purpose building board that can be used in diverse exterior and interior applications, ranging from cladding, eaves linings and fascias to ceilings, partitioning, panelling and suspended flooring.
Is nutec boards strong?
Nutec is a man-made fiber board. It is made by mixing short fibers into a cement mixture, which is then compressed to form a sheet material. The resulting board is very strong and very durable, and can be treated like any other cement surface.
Is nutec cheaper than brick?
Cost-Effective
According to Property Connect, constructing a Nutec home costs about 15% less than a brick and mortar house (Property Connect, 2018).
Is nutec waterproof?
NUTEC WATERPROOFING Cold Applied Roofing System Provides a waterproof liquid coating which sets within one hour and is guaranteed for 5 years.
Is nutec board fire resistant?
Nutec fibre-cement high performance properties and added benefits include: the use of safe renewable fibres; considerable tensile strength with enhanced dynamic load bearing properties; excellent thermal properties; water and wind resistance; hail resistance; fire resistance and resistance to fungus, rodents and acid.
Is nutec board heat resistant?
Interpreting Nutec K-Values per Table 1 Nutec products exhibit low thermal conductivity properties when compared with other sheet roofing and cladding products. This is ideal when reduced heat build up in summer and heat loss in winter is required.
Do banks finance nutec homes?
Yes, all the major South African banks will consider any timber frame Nutec house built in accordance to SANS 10082 for financing.
Can you insure a nutec house?
Yes, your timber frame Nutec house will be insured by South African insurance companies if built in accordance to SANS 10082.
Is it cheaper to build a house with brick or wood in South Africa?
In South Africa, it’s mostly more expensive to build in wood and also in South Africa we just don’t have a wood building culture. He says the volumes are fairly low and that is also one of the main cost drivers. As you build more on something you become better and usually cost will also go down.
What is the best paint for nutec boards?
Polyacrylic emulsion paints have been found to be the most suitable and cost-effective paints for use on Nutec-cement and fibre-cement materials. They are alkali resistant and can be applied directly onto the surface.
Who makes nutec?
Roofing & Cladding Solutions
Everite manufacturers of Nutec-cement building products including roofing, roofing trims, ceilings, vertical cladding and building accessories suitable for residential, commercial and industrial applications.
What is the difference between nutec and Wendy houses?
The boards are used as a cladding to replace traditional pine boards on Wendy houses and garden sheds. Nutec Wendy Houses will last longer than traditional pine clad structures, and require less maintenance, however, Nutec does require a higher initial investment to build.
How do you drill a nutec?
Although Nutec Fascia and Barge Boards are nailable, when fixing near to the edge but not closer than 25 mm, holes must be drilled and not punched. An ordinary hand drill and steel drill bits specially sharpened to a 20° angle are recommended. Do not use hammer drills and masonry bits.
How much are ceilings South Africa?
Installing or replacing a ceiling typically costs R13890. 87 and R39312. 37 or R26518. 94on average, depending on what style you want, such as tray, beam and stretch ceilings.
