The Tommy Gate Cantilever Series is a modern hydraulic lift that is specifically designed to operate seamlessly with commercial vans.
Why is it called a Tommy lift?
Woodbine Manufacturing Company was founded in 1965, in Woodbine, Iowa by Delbert “Bus” Brown. Working alone, Bus designed and constructed the original Tommy Gate Hydraulic Lift, which he named after his son.
How much weight can a Tommy Gate Lift?
The lifting capacity of standard pickup liftgates ranges between 750lbs to 1500lbs.
Why is liftgate service so expensive?
There is a very small task on the side of a business owner, who will require the service of liftgate but the freight delivery service company would need more time and service for using them. This extra charge is for accommodating the extra loading and unloading activities during pick up or delivery.
How much does a liftgate cost?
Depending on the lift gate model and size, a unit can cost anywhere between $2,000 to $7,000. Lift gates can handle up to around 3,500 pounds (about 1.6 tons) and fold up after use.
How much does a Tommy lift weight?
1300 & 1500 lbs.
Original Series The Original Series is a single-cylinder, parallel-arm design based on a cable and pulley system. The classic pickup lift.
Which cars have Powerlift Gates?
Most Interesting SUVs with Power Liftgates
Range Rover Velar. The 2021 Range Rover Velar is one of the best examples of a luxury SUV that’s available today. Lexus GX. The 2021 Lexus GX is one of the more unique SUV models on our list because of its unconventional liftgate. Lincoln Navigator. Nissan Armada. Toyota Sequoia.
How do you use a Tommy Gate Lift?
To activate the control, press the “LIFTGATE ACTIVATED” hidden switch twice within one second (located under the Tommy Gate logo). You should see the red “LIFTGATE ACTIVATED” light when the control is activated. To lower the platform, push the toggle switch down. To raise the platform, push the toggle switch up.
How do you lubricate a Tommy Gate?
Clean the inside surfaces of the uprights with a nonflammable solvent. Lubricate the roller chains, sliders, uprights, and pivot points with clean, high-quality, nondetergent, petroleum-based oil – DO NOT USE GREASE. Use nondetergent 10W @ (14°F-32°F), 20W @ (32°F-104°F), and 30W @ (104°F-122°F).
How do you remove a Tommy lift gate?
Proceed to the passenger’s side of the Tommy Gate and remove the latch padlock (Figure 1). Now lift the passenger’s side latch off the platform pin with one hand while holding the top of the platform with your other hand. Now pull the platform open and step away from the platform as it opens.
How long do Liftgates last?
“They’re very handy, and they last a long time — at least 10 years — and they run off the truck batteries with no charging assistance.” Another fleet executive said liftgates can improve operations.
How much weight does a lift gate add to a truck?
Lift gate weight capacity can range from 1500 lbs to 3500 lbs. As a general rule you are going to see smaller capacity gates on smaller trucks and larger capacity gates on larger trucks. You can get lift gates for trucks as small as a pickup or light utility truck or van. A good guideline to go with is 2500 lbs.
How much weight can a liftgate handle?
Most liftgates can handle freight that is equal to or less than 96 inches wide, and 48 inches deep. This means that standard-sized pallets can easily be used with a liftgate. The weight limit on a standard liftgate is 2500 lbs.
Can you add an automatic liftgate?
This retrofit power tailgate lift assisting system opens and closes your rear door by simply pressing a button. It provides additional security and value to your vehicle. Installation is designed for the do-it-yourself and comes with various brackets depending on your car.
What does liftgate service include?
Liftgate delivery service involves a truck affixed with a piece of hydraulic or electric equipment that is installed on the back of a truck, enabling freight to be lifted several feet from off the ground to the tailgate of the truck, or lowered from the truck’s tailgate to the ground.
How do I know if I need a liftgate?
If the individual freight items weigh more than 150 pounds each a forklift or liftgate is typically required. Construction Sites- They are common in construction areas wherein an adequate shipping dock has not been built.
