For smaller clogs, snaking your own drain is possible. Routine, minor sink clogs from hairballs or food remnants are typically located in the U-shaped trap directly below the sink or only a few feet deeper in the drainpipe. They may be cleared by using a light-gauge, hand-operated auger.

What can I use instead of a drain snake?

A drain snake (also called a plumber’s snake or auger) is a drain cleaning tool that plumbers have used for generations. If you don’t have a drain snake at your home, you can use a pipe cleaner, a straightened clothes hanger, or make this simple tool out of a plastic bottle: Start with an empty 2-liter plastic bottle.

What is the difference between a drain snake and an auger?

Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.

Can a drain snake break a pipe?

Drain Snakes Can Damage Pipes

While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.

How do you unclog a drain if a snake doesn’t work?

If the auger still doesn`t work, call a plumber. If you can`t remove an obstruction in a sink drain by using an auger inserted into the drain, tackle the clog through the U-shaped trap under the sink. Set a bucket under the trap.

Will Coke unclog drains?

Coke. Coke is a lesser-known fix you can find in your refrigerator. Pour a 2-liter bottle of cola — Pepsi, Coke, or generic brand substitutes — down the clogged drain. Coke is actually quite caustic and effective at clearing away buildup in your drains, but it’s far milder than commercial drain cleaners.

Can I use a drain snake on PVC pipe?

PVC pipes are an improvement over cast-iron pipes, because they have smooth walls that don’t allow debris to cling, so if you have to clear a clogged drain deep in the pipe, you can usually do it with a plunger or drain snake.

How long of a drain auger do I need?

Because they are designed for the toughest of clogs, the cable should be no smaller than 5/8 inch in size, with a minimum length of 75 to 100 feet in length. This snake is designed to clean out drains that are 3 inches or larger, which typically includes clean outs to the street.

Whats a drain auger?

A drain auger, also known as a plumbing snake or drain snake, is an auger specially designed for removing clogs and obstructions from a drain. Drain augers are a long tool with an appearance similar to a snake that can be fed down a drain or toilet to remove a blockage.

How do you unclog a sewer line?

Are you a home owner?
Step 1: Loosen the cap on the drain pipe. Step 2: Open the cap and let the buildup drain out. Step 3: Feed the auger cable into the drain pipe. Step 4: Run the auger until the clog is clear—and beyond. Step 5: Hose down the pipe and auger cable. Step 6: Slowly pull the auger back out of the pipe.

What does a auger look like?

auger, tool (or bit) used with a carpenter’s brace for drilling holes in wood. It looks like a corkscrew and has six parts: screw, spurs, cutting edges, twist, shank, and tang. The screw looks like a tapered wood screw and is short and small in diameter; it centres the bit and draws it into the work.

What does a drain auger look like?

A plumbing auger or plumbing snake is a long, flexible metal cable with a small, uncoiled spring on one end and a handle on the other. The auger head on the snake looks like a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it.

Can you snake a toilet with a drain snake?

A drain snake is a long, retractable metal cable that you wind down into a drain to either grab the material causing the clog, or force it through. A toilet snake is a type of drain snake made specifically for use on toilets.

How do you get a snake past the bend in the pipe?

The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.

How far should a drain be from a snake?

When to Snake a Drain

Use a drain snake when your sink, shower, or tub drain is draining slowly or is not draining at all due to soft clogs located up to 15 to 25 feet down the line.