5/16 inch is the measurement of 8mm. Just over 1/6 inch is 10mm. It’s 11mm and it’s almost 7/16 inch. The 12mm is about 15/32 inch.

Is 5/16 or 10mm bigger?

8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch. 11mm = almost 7/16 inch.

What is 5/16 on a tape measure?

On an imperial tape measure, the markings represent lengths in inches and fractions of an inch. Each large tick represents one inch (1″), and the ticks between represent the following fractions: 1⁄16“, 1⁄8“, 3⁄16“, 1⁄4“, 5⁄16“, 3⁄8“, 7⁄16“, 1⁄2“, 9⁄16“, 5⁄8“, 11⁄16“, 3⁄4“, 13⁄16“, 7⁄8“, and 15⁄16“.

Is there a 10mm socket?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

What size is a 10mm socket?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

Is a 3/8 the same as a 10mm?

It’s the same size. 3/8 is in inch and and its 10mm.

Is 7/8 the same as 22mm?

7/8″ or 22mm? 7/8″ is 0.875″ and 22mm is 0.866142″ which means the 22mm would give a slightly tighter fit and thus be less likely to strip.

What is 5/16 on a ruler?

The markings on a standard ruler represent the fractions of an inch. The markings on a ruler from the start to the 1″ mark are: 1⁄16“, 1⁄8“, 3⁄16“, 1⁄4“, 5⁄16“, 3⁄8“, 7⁄16“, 1⁄2“, 9⁄16“, 5⁄8“, 11⁄16“, 3⁄4“, 13⁄16“, 7⁄8“, 15⁄16“, and 1”.

Where is 5/16 of an inch on a ruler?

The very first line on the left hand side of the ruler is the 1/16 of an inch mark. Between 0 and 1 inch, there are marks that denote 1/16, 2/16 (or 1/8), 3/16, 4/16 (or 1/4), 5/16, 6/16 (or 3/8), 7/16, 8/16 (or 1/2), 9/16, 10/16 (or 5/8), 11/16, 12/16 (3/4), 13/16, 14/16 (or 7/8), 15/16, 16/16 (or 1) of an inch.