The nF error code indicates that the Samsung washing machine is not filling with water. The causes of the problem: low pressure in the pipeline network, valve breakage, clogged water supply hose, dirty valve in the inlet, blocked filter.
What does it mean when your washer says NF?
NF stands for “no fill” to indicate that the machine cannot be safely filled up with water. You’ll run into an NF code when your washing machine has spent a total of 15 or more minutes trying to fill itself up without success.
How do I reset the code 4C on my Samsung washer?
To reset your washing machine, you simply need to:
Unplug the washer from the power for a couple of minutes and then plug it back in.Turn the washing machine on and then check if the 4C error code is gone.
Why is my Samsung washing machine not filling up with water?
The most common reason is a problem with the water supply, or a blocked or kinked water supply hose. In this situation, the washing machine will drain for 3 minutes and the power button will be inoperative. In this case, please clean the debris filter and mesh filter.
Why does my Samsung Washer keep saying 4C?
4C or 4E is an error code which indicates that your washing machine has detected an issue with the water supply. This could mean that your Samsung washing machine is not able to generate a supply of water due to a blocked or kinked water supply hose.
How can I fix error 4C?
How to fix the error
Check if cold water is supplied to the apartment.Disconnect the washing machine.Make sure the drain hose is connected correctly.See what the pressure of the water passing through the inlet hose is.Turn on the machine and start it in the “Rinse and Spin” mode.
What would cause a washing machine not to fill up with water?
The hot and cold water hoses that lead to your machine should have a filter screen to catch any large particles that might be coming through the lines. Sometimes these screens can get clogged, which keeps water from flowing properly. This is probably the most common reason for a washer not filling with water.
Why is my washing machine not giving water?
Water comes into your washing machine for the wash and rinse cycles through the water inlet valve. So a lack of water at the wash or rinse cycle could be a result of a broken water inlet valve. Unplug the washer, then use a multi-meter to verify that the solenoids to open the valve have continuity.
