If the SLP or SL Message is Alternating with the Water Temperature on the Display, the Spa is Operating in the Sleep Heating Mode.
How do you fix the code on a hot tub?
How to Troubleshoot a Hot Tub FLO Error Code
Shut down the spa at the breaker.Make sure there is no debris in the water that can get sucked into the pump.Take out all of the filter(s) and set them aside.Turn spa back on at the breaker with the filters out.
What does SL mean on a strong spa?
SLEEP – SL, SLP
Sleep is considered a vacation heater setting, and will maintain your spa water at the most affordable price. Spa will only heat during your filter period.
How do I get my Beachcomber hot tub out of sleep mode?
Press any button to exit standby mode. Note: If hot tub is in a heat cycle when standby is selected the 2 speed pump or Hush Pump will run for approximately 15 seconds. On all systems, the 2 speed filter pump or Hush Pump and ozone generator will run during filtration.
What mode should my hot tub be in?
Economy is a good setting for those who use the hot tub daily. The drop in temperature fluctuates during the year from minor or no temperature falls in the summer, to larger drops in the coldest part of winter.
How do you change the mode on a Beachcomber hot tub?
To change heating modes, press the button then the button. To activate this jet pump, press the button once to activate low speed, twice to activate high speed and three times to turn the pump off. The low speed will turn off automatically after 4 hours and the high speed will turn off after 15 minutes.
How much do Freeflow Spas cost?
Freeflow® spas start at $3,700 and some hot tubs in the industry retail for $14,000 or more. How much does installation of a hot tub cost?
What is SE mode on hot tub?
SE = Spa operating in Standard-in-Economy Mode.
What is Eco mode on hot tub?
ECONOMY mode heats the spa water during filter cycles only. For example if your spa is set for 100 degrees it will heat until the water temperature reaches 100 as long as the filter cycle is running.
What is St mode on hot tub?
Standard (displays Std or St)
The heating will come on whenever the water temperature drops below the thermostat set point, so the water will always be hot, and your hot tub will always be ready to use.
What does SL mean on a Viking spa?
Sleep Mode heats the spa to within 20°F/10°C of the set temperature only during filter cycles. “SL” will display solid when temperature is not current, and will alternate with temperature when temperature is current.
Can I turn my hot tub off overnight?
The answer is yes! Hot tubs are designed to be left on permanently and this is how they work best. Of course, they’ll need to be drained regularly but for the most part, they are left on 24/7.
