.

In respect to this, what do you put on wood to bring out the grain?

All you really need to bring out the grain is a natural stain or linseed oil. Both of which are incompatible with water based finishes if that is what you intend to use. Depending on the temperature and humidity it might take three days to a week for the oil to cure enough to topcoat.

Beside above, how do you bring wood color to natural? Sand first with medium grade paper. Stroking in long, straight lines with the grain will bring out the natural color of the wood. Sand again with your fine sandpaper for an even smoother finish. Clean the surface with a tack cloth or a cloth dampened with mineral spirits.

Also to know is, do you sand after final coat of polyurethane?

No, you don't sand the final coat. You make sure you either spray it, or lay it on nice and even. Sand the previous coats to make sure there is a perfectly flat and even base for the final coat.

What is the best natural wood finish?

Wood Finishes: Several Natural Solutions

• Tung oil. Tung oil comes from the seed or nut of the tung tree.
• Beeswax. Beeswax has been used as a wood protector for years as well.
• Soy wax. Soy wax can be used in the same manner as beeswax.
• Linseed oil.
• Shellac.
• Walnut oil.
• Jojoba oil.
• Sunflower oil.