.

Consequently, how do you attach picket fence panels to posts?

Screw or nail the top and bottom horizontal rails into the fence posts, using either 4-inch wood screws or 18d to 20d nails. If the horizontal rails protrude slightly at the end of the fence panels, which is common with spaced picket fencing, you can screw straight through the horizontal rails and into the posts.

Subsequently, question is, how do you make a picket fence with uneven ground? Keep the picket tops level to build a fence over uneven ground.

1. Mark your fence line with wood stakes and mason's twine.
2. Dig the post holes 10 to 12 inches across and 24 inches deep.
3. Attach two, 2x4 runners, one 3 inches above the ground and one 3 inches below the top of the posts, between the first two posts.

Beside above, how high should fence pickets be off the ground?

Most situations call for a picket fence that is 2 to 5 inches off the ground. However, it's important to pay attention to the environment around the fence line, and if necessary, position the fence a couple of inches higher.

How do you build a privacy fence with uneven ground?

When building a fence on uneven terrain, one option is to follow the contours of your yard. This means that the horizontal rails of your fence will follow your yard in a smooth line that is parallel to the ground rather than level. The contoured method works best when the slope is slight rather than dramatic.