.

Furthermore, how do you nail t111 siding?

How to Nail T1-11 Siding

1. Hold the first sheet of T1-11 siding against the building's wall studs with the edge of its inside shiplap seam covering a wall stud.
2. Tack the top center of the T1-11 to a wall stud with an 8d galvanized nail, using a hammer to drive the 8d nail.

Likewise, do you need to prime t1 11 siding? Prime the siding with a heavy acrylic primer. I've used XIM Peel Bond with great success. Because of its finish, painting T1-11 siding is rather tricky. Use a roller for large areas, and a brush to get into grooves, and tight spots.

Correspondingly, what goes under t1 11 siding?

There are two plywood siding panel T1-11 grades: Plywood and OSB. The OSB version is usually a bit cheaper than the plywood, but there's a downside: OSB doesn't normally last as long, it's easier to damage, and it can't be finished in as many was as plywood T1-11 siding.

How much does it cost to install t1 11 siding?

The average cost to install T1-11 plywood siding ranges between $1,500 and $3,700, with an average of $2,500 for 500 square feet of exterior wall space. For OSB siding, that cost stays in the same general range, but the average drops down to $2,200 for the same 500 square feet.