3.14. 4 Globular Transfer. This type of transfer refers to the state of transfer between short-circuiting and spray-arc transfer modes. Large globules of wire are expelled off the end of the electrode wire and enter the weld puddle.

What voltage settings are needed for globular transfer?

The voltage range for Globular is 21-25 depending on the welding gas. Mike Brace is right on his welding gas recommendation. In Globular transfer, the droplet size is twice the diameter of the wire, so if you are using .

What is MIG spray transfer?

Spray Transfer is a transfer where a higher voltage is applied and the electrode does not contact the metal. The transfer is exactly like it sounds. The wire sprays or has very fine mist transferring to the metal. ... Spray transfer can also be defined by a minimum amperage setting by welding engineers for thicker metals.